Skip to main content
GARGLOO

Headphone Test Online

New headphones? Check both ears in 30 seconds.

Runs on your device

At a glance

Processing:
Tones are generated locally with the Web Audio API — nothing is recorded or sent to a server.
Privacy:
Sound is generated in this tab only. Nothing is recorded or uploaded — stop the tone any time.

Last updated: 2026-11-14

Common use cases

  • Checking a new pair of headphones before the return window closes
  • Finding out whether the left or right earcup died on a headset
  • A quick stereo check after buying a new cable or adapter
  • Gamers running a left/right check after every new headset

About this tool

Test your headphones before a call, a flight, or a return deadline. Play a 440 Hz tone in the left ear, then the right, to catch a dead earcup; run the polarity test to find a side wired backwards; let the stereo image travel from left to right; and sweep from 20 Hz to 20,000 Hz to find the highest frequency you can hear. Everything is generated locally with the Web Audio API — no microphone, no recording, nothing uploaded.

How to use it

  1. Press Play left ear, then Play right ear — a 440 Hz tone plays for 2 seconds on each side. Mark whether you heard it.
  2. Press Play in-phase, then Play out-of-phase — the in-phase tone should sound centred inside your head, the out-of-phase one wide and hollow. Pick the one that sounded centred.
  3. Press Play stereo image — one tone travels from your left ear to your right ear over 8 seconds.
  4. Press Start sweep and tap “I can't hear it anymore” the moment the tone disappears — the page records the highest frequency you heard.

Worked examples

Input: Left ear test, then right ear test

Output: Tone heard in the left ear, then the right ear

Pan −1 is full left, +1 is full right — a dead earcup is silent on its side.

Input: Polarity test, in-phase then out-of-phase

Output: In-phase sounds centred, out-of-phase sounds wide and hollow

If the out-of-phase version sounds centred, one side is wired with reversed polarity — check the cable first.

Input: 20 Hz–20 kHz sweep, 24 seconds

Output: Highest heard 15,200 Hz

Most adults stop hearing between 14,000 and 17,000 Hz — that is normal hearing, not a broken headphone.

Practical tips

  • Test with the volume at the 30% default first — turn it up only if the tone is too quiet, and never past the 70% warning for long.
  • Push the plug fully in before judging a silent side — a half-inserted plug is the most common cause of one dead earcup.
  • Run the sweep in a quiet room — background noise masks the top end first, and a noisy room reads as a lower highest frequency.
  • Check the earcup seal before worrying about a low sweep result — a loose fit loses the top end before anything else does.

Common mistakes

  • Testing with the system muted or the wrong output selected — Bluetooth headphones that are connected but not selected stay silent.
  • Judging a silent earcup before checking the plug — push it fully in and try a second cable before blaming the headphones.
  • Reading a 15,000 Hz sweep stop as a broken headphone — most adults stop between 14,000 and 17,000 Hz, and that is normal.
  • Expecting a diagnosis from a listening check — this finds a dead side and reversed polarity; it cannot measure frequency response or hearing.

How this compares

Dedicated headphone-test sites do the same job in a tab — this one matches them on the left/right test, the 440 Hz polarity tone, the stereo image and the sweep, and adds the plain-language verdicts for what each result means. The tradeoff: no test-signal downloads and no lab-grade measurement — it checks what you can hear, it does not certify hardware.

Good to know

  • This is a listening check, not a hardware certification — it cannot measure frequency response, distortion, or driver matching.
  • The sweep shows what you can hear, not what the headphones produce — hearing varies with age, and a noisy room masks the top end.
  • The polarity test needs both ears working — a dead earcup makes the in-phase and out-of-phase versions sound the same.
  • Needs sound output and a tap on a button — browsers block autoplay, so the tone only starts when you press Play.

Frequently asked questions

Is anything recorded or uploaded?

No. The tones are generated in your browser with the Web Audio API — no microphone is used, nothing is recorded, and nothing leaves your device.

What is the polarity test?

Two 440 Hz tones, one per ear. In phase, the tone sounds centred inside your head. Out of phase, it sounds wide, thin and hollow — as if it comes from nowhere in particular. If the out-of-phase version is the one that sounds centred, one side of your headphones (or the cable or adapter) is wired with reversed polarity.

The left test plays in both ears — is my headphone broken?

Not necessarily. Check the balance setting in your system sound settings first, then the cable and the plug — a mono adapter or a half-inserted plug plays the same sound on both sides. If the balance is centred and the plug is fully in, try a second pair to rule out the source.

I stop hearing the sweep at 15,000 Hz — are my headphones broken?

Almost certainly not. Most adults stop hearing between 14,000 and 17,000 Hz, and the top end fades with age — that is normal hearing, not a broken headphone. Only a stop well below 8,000 Hz is worth checking first (fit, earcup seal, volume), and even then this is a listening check, not a diagnosis.

What does the stereo image test do?

One 440 Hz tone travels from your left ear to your right ear over 8 seconds. If the sound moves smoothly across, the stereo image is working. If it jumps, stays in one place, or vanishes in the middle, check the balance setting and the cable.

Why can't I hear anything?

Check three things: the volume slider on this page, your system volume and mute, and that the sound is going to the right output device — Bluetooth headphones that are connected but not selected as the output stay silent.

Is this a hearing test?

No. This is a headphone check — it finds a dead earcup, reversed polarity and obvious imbalance. It does not measure a frequency response curve and it cannot diagnose hearing loss. For real hearing results, see an audiologist.

All audio tools
Headphone Test Online | GARGLOO