Skip to main content
GARGLOO

Microphone Test Online — Check Your Mic Free

Speak for 10 seconds — see if your mic is working.

Runs on your device

At a glance

Input:
Audio from your microphone
Processing:
Analysed locally with the Web Audio API — no speech recognition, nothing sent to a server.
Privacy:
Your voice is analysed in this tab only. Nothing is recorded or uploaded — the mic stops when you stop the test or close the tab.

Last updated: 2026-11-12

Common use cases

  • Checking a headset mic before a video call or online class
  • Testing a new USB microphone before recording
  • Finding out whether background hum or hiss is ruining recordings
  • A quick mic check on a phone before a voice note or interview

About this tool

Check your microphone before a call, class, or recording. Press Start, allow the mic, and speak normally for about 10 seconds — you get a live level meter, a plain-language verdict, background-noise and hum readings, and a 5-second clip you can play back. Everything is analysed in this tab; nothing is uploaded.

How to use it

  1. Press Start test and allow microphone access when the browser asks.
  2. Speak normally for about 10 seconds — read this sentence out loud.
  3. Read the verdict: working, too quiet, too loud, or clipping — plus your background-noise level and any mains hum.
  4. Press Record 5 seconds to hear yourself back, or pick another mic from the device list and test again.

Worked examples

Input: Normal speech, loudest peak −12 dBFS

Output: Verdict: working — level is good

−24 to −6 dBFS is the target range for normal speech.

Input: Quiet room, silence at −58 dBFS

Output: Background noise: good

−60 to −50 dBFS is good; below −60 is excellent.

Input: Speech peaking at 0 dBFS

Output: Verdict: clipping — move the mic further away

0 dBFS is the digital ceiling — the waveform is being cut off.

Practical tips

  • Test in the room where you will actually call or record — the noise reading follows the room.
  • Hold the mic 15–20 cm from your mouth and speak at your normal call volume.
  • If the verdict says too loud, move the mic further away or lower the input volume in your system settings.
  • A hum at 50 Hz or 60 Hz usually comes from mains power — move away from chargers and power cables.

Common mistakes

  • Testing in silence and expecting a verdict — the tool needs about 10 seconds of normal speech.
  • Holding the phone mic against your mouth — it clips; hold it a hand's width away.
  • Leaving another app on the mic — close other call or recording apps before testing.

How this compares

Dedicated mic-test sites do the same job in a tab — this one adds a plain-language verdict, noise and hum readings, and a 5-second playback, with the same local-only promise. The tradeoff: no recording beyond 5 seconds and no transcription — it checks the mic, it does not write down what you say.

Good to know

  • Needs microphone permission and HTTPS — the browser blocks mic access on plain HTTP and without a tap on Start.
  • Levels are a guide, not a calibrated meter — different mics and browsers report slightly different levels.
  • The 5-second clip is stored in this tab only — close the tab and it is gone.
  • No speech recognition is used, so the tool cannot tell you what you said — only how loud and clean it sounds.

Frequently asked questions

Is my voice recorded or uploaded?

No. The audio is analysed in this tab with the Web Audio API and nothing is sent anywhere. The optional 5-second playback clip is stored only in this tab and disappears when you close it. No speech recognition is used — Chrome, Edge and Safari send speech-recognition audio to the browser maker's service, and this tool never uses it.

What level should my voice reach?

Speak normally: the loudest level should land between about −24 and −6 dBFS. Below −24 is too quiet, above −6 is too loud, and hitting 0 dBFS means the mic is clipping.

What is a good background-noise level?

Silence should stay below about −50 dBFS. A noise floor of −60 dBFS or lower is excellent, −60 to −50 is good, −50 to −40 is audible hiss, and above −40 is noisy.

Why does it say no microphone found?

The browser needs microphone permission and a mic on the device. Allow the mic when asked, check the device picker, and make sure no other app is holding the mic.

Does it work on phones?

Yes, on phones with a microphone — the browser asks for permission first. Hold the phone close and speak at your normal call volume.

All audio tools
Microphone Test Online — Check Your Mic Free | GARGLOO