Speaker Test Online — Check Left & Right Speakers
Is your left speaker dead? Find out in 10 seconds.
At a glance
- Processing:
- Tones are generated locally with the Web Audio API — nothing is recorded or sent to a server.
- Privacy:
- Sound is generated in this tab only. Nothing is recorded or uploaded — stop the tone any time.
Last updated: 2026-11-13
Common use cases
- Checking a new speaker or soundbar before the return window closes
- Finding out whether the left or right channel died on a laptop or TV
- Testing headphones for a dead earcup before a call or a flight
- A quick stereo check after plugging in a new audio cable or adapter
About this tool
Test your speakers before a call, a film, or a return deadline. Press Play tone for a 440 Hz concert-A tone, run the left-right-both sequence to hear each channel on its own, or sweep from 20 Hz to 20,000 Hz to hear the whole range. Everything is generated locally with the Web Audio API — no microphone, no recording, nothing uploaded.
How to use it
- Press Play tone — a 440 Hz sine tone plays for 2 seconds through the selected channel.
- Press Test left → right → both — three 2-second tones play: left speaker, right speaker, then both together, 6 seconds in total.
- Press Frequency sweep to hear the tone slide from 20 Hz to 20,000 Hz over 10 seconds — it should rise smoothly with no gaps or rattles.
- If one side is silent, check the volume slider, your system balance setting, and the cable before blaming the speaker.
Worked examples
Input: 440 Hz tone, both speakers
Output: A clear steady tone from both sides
440 Hz is concert A — the reference pitch every instrument tunes to.
Input: Left → right → both sequence
Output: Tone moves left, then right, then centre
Pan −1 is full left, 0 is centre, +1 is full right.
Input: 20 Hz–20 kHz sweep, 10 seconds
Output: A smooth rising tone with no gaps
The sweep is logarithmic because hearing is logarithmic.
Practical tips
- Test with headphones first — the left/right split is unmistakable there, and it tells you whether the problem is the speakers or the source.
- Turn the volume to about 50% before the first tone — the default is deliberately volume-safe.
- A rattle at low frequencies usually means something loose near the speaker, not a broken driver — move objects away and try again.
- If the sweep goes silent at the top end, that is normal for many small speakers — most laptop speakers roll off well below 20,000 Hz.
Common mistakes
- Testing with the system muted or the wrong output selected — headphones plugged in send the sound there, not to the speakers.
- Judging stereo on a phone speaker — the two drivers are centimetres apart, so use headphones for the left/right test.
- Cranking the volume to 100% on the first tone — start at 50% and turn it up only if the tone is too quiet.
- Assuming a silent channel means a dead speaker — check the balance setting and the cable first; both are free fixes.
How this compares
Dedicated speaker-test sites do the same job in a tab — this one matches them on the 440 Hz tone, the left/right/both sequence, and the sweep, and adds the plain-language explanations of what each sound means. The tradeoff: no test-signal downloads and no lab-grade measurement — it checks what you can hear, it does not certify hardware.
Good to know
- This is a listening check, not a hardware certification — it cannot measure wattage, distortion, or frequency response.
- Small speakers roll off at the extremes — silence below ~100 Hz or above ~15,000 Hz is normal for laptop and phone speakers.
- The sweep shows what you can hear, not what the speaker produces — hearing varies with age and with the room.
- Needs sound output and a tap on a button — browsers block autoplay, so the tone only starts when you press Play.
Frequently asked questions
Is anything recorded or uploaded?
No. The tones are generated in your browser with the Web Audio API — no microphone is used, nothing is recorded, and nothing leaves your device.
What is the 440 Hz tone?
440 Hz is concert A (A4) — the reference pitch every instrument tunes to, set by ISO 16. If your speakers play it cleanly, the midrange is working.
The left test plays in both ears — is my speaker broken?
Not necessarily. Check the balance setting in your system sound settings first, then the cable and the speaker itself. A mono downmix (one speaker plugged into a mono jack) also plays the same sound on both sides.
What does the frequency sweep do?
It plays a tone that slides from 20 Hz to 20,000 Hz over 10 seconds, on a logarithmic scale — because hearing is logarithmic, equal steps on a log scale sound like equal steps in pitch. You should hear it rise smoothly; gaps or rattles point at a speaker problem.
Why can't I hear anything?
Check three things: the volume slider on this page, your system volume and mute, and that the sound is going to the right output device (headphones plugged in send the sound there, not to the speakers).
Does it work on phones?
Yes — the tone plays through the phone speaker or connected headphones. Use the left/right test with headphones to hear the channels clearly; phone speakers are close together, so the stereo effect is subtle.
Is this a hardware certification?
No. This is a listening check — can you hear left versus right, and does the sweep sound smooth? It cannot measure wattage, distortion, or frequency response the way lab equipment can.

