Guide · 7 min read
How Many Solar Panels Do I Need?
Size a solar system in 7 steps: read your bill, pick your coverage, look up your sun hours, apply the formula, and check your roof.
Last updated: 2026-11-14
Tools for this guide
The short answer
Most homes need somewhere between 15 and 25 panels of 400 W each. The exact number comes from your yearly electricity use, your city's sun hours, and the panel wattage — not from the size of your house. A home using 10,549 kWh a year, with 4.4 peak sun hours and 400 W panels at 85% system efficiency, needs 20 panels: an 8 kW system covering about 420 square feet of roof.
This guide walks through the same calculation the Solar Panel Calculator runs, step by step, so you can check its result by hand. It is a sizing estimate for planning and comparing quotes — not a system design. A real installer still has to measure your roof, check shading, and confirm what your utility allows.
Step 1 — Read your bill
Open your electricity bill or your utility's app and find your total use for the last 12 months, in kilowatt-hours (kWh). If the bill only shows monthly use, add up 12 months — a single summer month will mislead you, because air conditioning and heating swing use by thousands of kWh across the year.
If you cannot find a full year, use 10,549 kWh as a rough stand-in: it is the average US home's yearly use, and it is the worked example in this guide. But your own number is always better — two identical houses can differ by a factor of two depending on heating, cooling, and how many people live there.
Step 2 — Pick your coverage
Coverage is the share of your yearly use you want the panels to produce. 100% means the system is sized to generate as much as you use in a year. 80% is the common choice when the roof is small or the budget is tight — you still buy some power from the grid. 120% leaves headroom for a future electric car or heat pump.
An electric car adds roughly 3,000 kWh a year for typical driving — about 6 extra panels at 4.4 sun hours. If a car is in your plans within a few years, size for it now or leave roof space and inverter capacity for it; adding panels later costs more per panel than building them in from the start.
Step 3 — Look up your city's sun hours
Sun hours — peak sun hours — measure how much usable sunlight a place gets: one peak sun hour equals one hour of full-strength sun. The US average is about 4.4. Phoenix averages about 6.6; Seattle about 3.8. The same 10,000 kWh home needs 13 panels in Phoenix and 22 in Seattle — the sun matters more than almost anything else.
Use your city's annual average from a source like NREL's PVWatts, not a summer value and not a national average. A system sized on summer sun will underproduce all winter, and one sized on the national average will be wrong in both Phoenix and Seattle.
Step 4 — Apply the formula
The formula is: panels = your daily kWh ÷ (sun hours × system efficiency) × 1,000 ÷ panel watts, rounded up. System efficiency is about 85% for a typical install — it covers inverter losses, heat, wiring, and dust. Panel wattage is usually 400 W today.
Take the 10,549 kWh home: 10,549 ÷ 365 = 28.9 kWh a day. 28.9 ÷ (4.4 × 0.85) = 7.7 kW of panels needed. 7,700 W ÷ 400 W = 19.3 panels — and you cannot buy a third of a panel, so round up to 20. That is an 8 kW system: 20 × 400 W.
Step 5 — Round up to whole panels
Always round up, never down: rounding down leaves you short every single day, while one extra panel costs a few hundred dollars once and produces for 25 years. The 10,549 kWh example rounds from 19.3 to 20 panels.
Rounding up also gives you a small buffer for the slow decline every panel has — output falls a fraction of a percent a year, so a system that exactly covers your use today will fall slightly short in year 15. One extra panel now is cheaper than adding one later.
Step 6 — Check your roof area
A modern panel covers about 21 square feet including its share of spacing. Twenty panels need about 420 square feet of usable roof — not just total roof, but roof that faces the right way, is not shaded, and is not taken by vents, chimneys, or skylights.
Measure the clear area on your best roof face and divide by 21. If the answer is smaller than your panel count from Step 5, you have three honest options: higher-wattage panels, a smaller system that covers part of your use, or panels on a second roof face. What you should not do is squeeze panels into shaded corners to hit a number — shaded panels drag down the whole string.
Step 7 — Get quotes and compare
Get at least three quotes, and compare them on the same numbers: total system size in kW, panel count and wattage, price per watt, and the estimated first-year production in kWh. Two quotes for the same house can differ by thousands of dollars, and the difference is usually in the equipment or the production estimate — not in the labour.
Ask each installer to show the sizing calculation for your bill and your sun hours, and to state the assumptions: which sun-hours figure, which efficiency, which panel. If a quote cannot show its working, treat it the way you would treat a builder who cannot show a measurement. Then run the numbers through the Solar Panel Calculator yourself — it takes two minutes and tells you whether a quote's panel count is in the right range.
What sizing cannot tell you
This method sizes a system; it does not design one. Shading from a tree or a neighbour's house, roof direction and tilt, the inverter and wiring, and your utility's connection rules all change what can actually be built — and none of them appears in the formula.
A north-facing roof in the northern hemisphere, heavy shade after 3 p.m., or a utility that caps how much you may export can each cut production far below what the formula predicts. That is why the result here is a planning estimate: it tells you whether solar is roughly a 13-panel job or a 30-panel job, and whether a quote is plausible — not the final design. The installer measures the roof and confirms the rest.
Frequently asked questions
How many solar panels does an average home need?
An average US home uses about 10,549 kWh a year. At the US average of 4.4 peak sun hours, with 400 W panels and 85% system efficiency, that works out to 20 panels — an 8 kW system covering about 420 square feet. Your own bill is the number that matters: a home using half as much needs about half as many panels.
Does roof direction matter more than the number of panels?
Direction and shade change how much each panel produces, so they change the count. A south-facing roof in the northern hemisphere gets the most sun; east- and west-facing roofs still work but need more panels for the same output. Heavy shade is the bigger problem: a shaded panel can drag down the panels wired with it, so an installer may recommend fewer panels in full sun rather than more panels in shade.
Do I need a battery with my solar panels?
No — a battery is a separate decision from sizing. Panels alone cover your daytime use and send the surplus to the grid where your utility allows it. A battery adds backup power and lets you use more of your own solar at night, but it does not change how many panels you need; size the panels first, then decide about storage.
How accurate is this sizing estimate?
It is a planning estimate, good to within a panel or two when your yearly use and sun hours are right. It does not account for shading, roof direction, or utility rules, and panel output declines slightly every year. Use it to compare quotes and to know whether solar is roughly a 13-panel or a 30-panel job — then let the installer measure the roof for the final design.
Can I add panels later if I buy an electric car?
Yes, but it costs more per panel than building them in now. An electric car adds roughly 3,000 kWh a year — about 6 extra panels at 4.4 sun hours. If a car is likely within a few years, either size for it now or ask the installer to leave roof space and inverter capacity for the extra panels.
Try it now — free, no signup
Panel count, system size and roof area from your electricity use. Nothing you type is sent to a server.
Open Solar Panel Calculator
