Skip to main content
GARGLOO

Solar Panel Calculator

Panel count, system size and roof area from your electricity use.

Runs on your device

At a glance

Input:
Numbers you enter
Processing:
Runs locally in your browser
Privacy:
Nothing you type is sent to a server

Last updated: 2026-11-14

Common use cases

  • Sizing from the yearly bill — 10,549 kWh a year at the US average needs 20 panels of 400 W, an 8 kW system, about 420 sq ft of roof.
  • Comparing cities — the same 10,000 kWh needs 13 panels in Phoenix (6.6 sun hours) and 22 in Seattle (3.8 sun hours).
  • Sizing from a monthly bill — enter your monthly kWh or your monthly bill and price per kWh and the tool converts it to yearly use first.
  • Checking an EV's extra panels — an EV adding about 3,000 kWh a year needs about 5–6 more 400 W panels at the US average.

About this tool

How many solar panels does your home need? Enter your yearly electricity use — from your bill, your monthly use, or your monthly bill and price per kWh — and the answer is one formula: panels = ceil((daily kWh ÷ (sun hours × efficiency) × 1000) ÷ panel watts). The worked example on the page is a home using 10,549 kWh a year at the US average of 4.4 peak sun hours: (10,549 ÷ 365) ÷ (4.4 × 0.85) = 7.7 kW needed, and 7,700 ÷ 400 = 19.3, rounded up to 20 panels of 400 W — an 8 kW system on about 420 sq ft of roof. Sun hours come from NREL's PVWatts calculator (annual average, south-facing array at latitude tilt, typical year): Phoenix 6.6, Denver 5.7, Miami 5.6, Chicago 4.5, New York 4.5, Seattle 3.8. The median US home system installed in 2025 was 7.7 kW (Lawrence Berkeley National Laboratory), and 1 kW of panels makes about 1,367 kWh a year on the US average. This is an educational sizing estimate, not a system design — shading, orientation, inverter limits and utility rules need a site survey. Computed locally in your browser, with nothing stored or sent.

How to use it

  1. Enter your electricity use — yearly kWh, monthly kWh, or your monthly bill and price per kWh.
  2. Pick your city for its peak sun hours, or enter your own — the US average is 4.4.
  3. Adjust panel wattage and system efficiency if you know them (defaults: 400 W, 85%).
  4. Read the panel count, system size in kW and roof area — and the city table for the same home elsewhere.

Worked examples

Input: 10,549 kWh/year · US average 4.4 sun hours · 400 W panels

Output: 20 panels · 8 kW system · ~420 sq ft of roof

10,549 ÷ 365 = 28.9 kWh/day; 28.9 ÷ (4.4 × 0.85) = 7.7 kW; 7,700 ÷ 400 = 19.3 → 20 panels.

Input: 10,000 kWh/year · Phoenix 6.6 sun hours

Output: 13 panels · 5.2 kW system

10,000 ÷ 365 = 27.4 kWh/day; 27.4 ÷ (6.6 × 0.85) = 4.9 kW; 4,900 ÷ 400 = 12.2 → 13 panels.

Input: 10,000 kWh/year · Seattle 3.8 sun hours

Output: 22 panels · 8.8 kW system

27.4 ÷ (3.8 × 0.85) = 8.5 kW; 8,500 ÷ 400 = 21.2 → 22 panels — same home, 9 more panels than Phoenix.

Practical tips

  • Start from your real bill, not a guess — twelve months of kWh beats any rule of thumb.
  • Sun hours move the answer more than any other input — the same home needs 13 panels in Phoenix and 22 in Seattle.
  • Use the low month if the system must cover winter too — Seattle's December is 1.6 peak sun hours against a 3.8 annual average (PVWatts).
  • Check your roof first — 20 panels need about 420 sq ft of unshaded, south-facing roof.

Common mistakes

  • Confusing peak sun hours with daylight hours — Seattle gets 16 hours of daylight in June but only about 3.8 peak sun hours on the annual average.
  • Forgetting system losses — panels make their rated watts only at full sun; the 85% efficiency already accounts for soiling, wiring, inverter and temperature losses.
  • Sizing from one month's bill — a summer bill understates a year of use; use the yearly total or twelve months.
  • Trusting the annual average for winter — December sun is far below the average in northern cities; size for the month that matters or accept winter shortfall.

How this compares

Most solar calculators on the web are installer lead-gen forms: enter your address, get a sales call, no number on the page. This one gives the number instantly — panel count, system size and roof area — with the formula and the PVWatts sun-hours table on the page, and no signup, no address and no sales call. The tradeoff is that it sizes from your usage and your city's average sun, not from your actual roof: it cannot see shading, pitch or orientation, and it gives no cost quote — those need a site survey and a local installer.

Good to know

  • An educational sizing estimate, not a system design — shading, roof orientation and pitch, inverter limits and utility rules can change the real number.
  • City sun hours are annual averages from NREL PVWatts (typical year) — a real year can differ by about 10%, a real month by up to 30%.
  • Assumes a south-facing array at latitude tilt; a flat or north-facing roof gets less.
  • No cost or payback estimate — prices vary by installer, equipment and local rules.

Frequently asked questions

How many solar panels do I need for a 10,549 kWh home?

20 panels of 400 W — an 8 kW system covering about 420 sq ft — at the US average of 4.4 peak sun hours and 85% system efficiency. The formula is panels = ceil((daily kWh ÷ (sun hours × efficiency) × 1000) ÷ panel watts): (28.9 ÷ (4.4 × 0.85) × 1000) ÷ 400 = 19.3, rounded up to 20.

What are peak sun hours?

The day's sunlight squeezed into hours at full 1,000 W/m² strength — numerically the same as the solar radiation in kWh/m²/day, the solrad output of NREL's PVWatts calculator. Phoenix averages 6.6 peak sun hours, Seattle 3.8. They are not daylight hours: a long June day in Seattle has 16 hours of daylight but only about 3.8 peak sun hours on the annual average.

How much roof space do I need?

About 21 sq ft per standard 400 W panel — 20 panels need about 420 sq ft (about 39 m²). The calculator shows both square feet and square metres. Shading, roof pitch and orientation change the real number.

Is this a system design?

No — an educational sizing estimate. Shading, roof orientation and pitch, inverter limits and your utility's rules can move the real number by 25% or more. Get a site survey before you buy.

How big is a typical home system?

The median US home system installed in 2025 was 7.7 kW (Lawrence Berkeley National Laboratory). One kW of panels makes about 1,367 kWh a year on the US average.

All calculators

Relevant guides

Solar Panel Calculator | GARGLOO