Tire Size Calculator
Diameter, revs per mile and speedometer error for any two sizes.
At a glance
- Input:
- Numbers you enter
- Processing:
- Runs locally in your browser
- Privacy:
- Nothing you type is sent to a server
Last updated: 2026-11-14
Common use cases
- Plus-sizing a truck — moving from 265/70R17 to 285/70R17 is +3.49% taller, so an indicated 60 mph is really 62.1 mph and the truck sits 0.55 in higher.
- Winter tires — checking a narrower winter size stays within ±3% of the original diameter before buying.
- Flotation sizes — entering 33x12.50R20 directly and comparing it with the metric size on the truck now.
- Finding a legal replacement — the alternatives table lists sizes within ±3% of the original, closest first.
About this tool
What happens when you fit a bigger tire? Enter your current size and the size you are considering — metric (265/70R17) or flotation (33x12.50R20) — and the answer is one formula: diameter = rim + 2 × width × aspect ÷ 25.4. The worked example on the page is a truck moving from 265/70R17 to 285/70R17: 265/70R17 is 31.61 in tall with 638 revs per mile; 285/70R17 is 32.71 in — +3.49% taller — so at 60 mph on the speedometer you are really doing 62.1 mph, the truck sits 0.55 in higher, and the odometer under-records 337 miles every 10,000. The ±3% rule says keep a replacement within about 3% of the original diameter (Les Schwab, the Tire and Rim Association, UN Regulation No. 30) — a rule of thumb, not a guarantee of fit. Computed locally in your browser, with nothing stored or sent.
How to use it
- Enter your current tire size — read it off the sidewall (metric 265/70R17 or flotation 33x12.50R20).
- Enter the new size you are considering — P or LT prefixes are fine.
- Set the speedometer reading you care about (default 60 mph) for the error table.
- Read the comparison, the speedometer error at 30–70 mph, and the within-±3% alternatives list.
Worked examples
Input: 265/70R17 vs 285/70R17
Output: +3.49% taller · 62.1 mph at an indicated 60 · 0.55 in higher
285/70R17 is 32.71 in tall against 31.61 in; 60 × 32.71 ÷ 31.61 = 62.1 mph; the radius difference is (32.71 − 31.61) ÷ 2 = 0.55 in.
Input: 265/70R17 on its own
Output: 31.61 in tall · 638 revs per mile
Sidewall 265 × 70% = 185.5 mm = 7.30 in; diameter 17 + 2 × 7.30 = 31.61 in; circumference π × 31.61 = 99.29 in; 63,360 ÷ 99.29 = 638 revs per mile.
Input: 33x12.50R20 flotation size
Output: 33.00 in tall · 6.50 in sidewall · 611 revs per mile
Flotation sizes give the diameter directly: sidewall (33 − 20) ÷ 2 = 6.50 in; circumference π × 33 = 103.67 in; 63,360 ÷ 103.67 = 611 revs per mile.
Practical tips
- Read the size off the sidewall — the numbers are molded into the tire (265/70R17 means 265 mm wide, 70% aspect, 17 in rim).
- The speedometer error scales with speed — +3.49% is 31.0 mph at an indicated 30 and 72.4 at an indicated 70.
- Check the load index and speed rating too — a size that fits can still be wrong if it carries less load than the original.
- A bigger tire changes gearing — the engine turns slower at the same road speed, which can dull acceleration and change fuel use.
Common mistakes
- Reading the aspect ratio as millimetres — 70 in 265/70R17 is 70% of the width (185.5 mm), not 70 mm.
- Forgetting the rim — the diameter is rim + 2 × sidewall; two tires with the same width and aspect on different rims are different diameters.
- Trusting the ±3% rule as a fit guarantee — a size within 3% can still rub on suspension or bodywork.
- Ignoring the odometer — a +3.49% tire under-records about 337 miles every 10,000, so service intervals and resale mileage drift.
How this compares
Most tire size pages are thin comparison tables on content sites: two diameters and a percentage, no speedometer table, no alternatives list and no fit warning. This one gives the full comparison — diameter, sidewall, circumference and revs per mile side by side — plus a speedometer error table at 30–70 mph, a within-±3% alternatives list, speed-rating and load-index reference tables, and the fit warning up front. The tradeoff is that it compares sizes, it does not sell tires: it cannot tell you whether a size clears your suspension or matches your rim width — that needs a tire shop.
Good to know
- The ±3% rule is a rule of thumb, not a guarantee of fit — clearance, rim width, load index and speed rating all matter.
- Sizes are nominal — real tires vary by brand and model by about 1% in diameter.
- No fitment database — the tool cannot know your vehicle's suspension, brakes or wheel wells.
- Speedometer and odometer errors assume the factory tire was the original size — if the car already runs a different size, the baseline is off.
Frequently asked questions
What is 265/70R17 in inches?
31.61 inches tall. The sidewall is 265 × 70% = 185.5 mm (7.30 in), so the diameter is 17 + 2 × 7.30 = 31.61 in, with 638 revolutions per mile. The formula is diameter = rim + 2 × width × aspect ÷ 25.4.
How much does a bigger tire change the speedometer?
285/70R17 is 3.49% taller than 265/70R17, so at 60 mph on the speedometer you are really doing 62.1 mph. The error scales with speed: 30 reads as 31.0 mph, 70 reads as 72.4 mph.
What is the ±3% rule?
Keep a replacement tire within about 3% of the original diameter. It is cited by Les Schwab, the Tire and Rim Association and UN Regulation No. 30 — a rule of thumb, not a guarantee of fit: check clearance and load rating with a tire shop.
Can I enter a flotation size like 33x12.50R20?
Yes — enter it directly. A 33x12.50R20 is 33.00 in tall with a 6.50 in sidewall and 611 revs per mile. Metric sizes (265/70R17) and flotation sizes both work, and P or LT prefixes are fine.
Will a bigger tire change my odometer?
Yes. With 285/70R17 instead of 265/70R17 the odometer under-records about 337 miles for every 10,000 real miles — the bigger tire turns fewer times per mile, so the odometer thinks you drove less.

