Skip to main content
GARGLOO

Length Converter Online

Metric and imperial lengths, converted instantly.

Runs on your device

At a glance

Processing:
Runs locally in your browser
Privacy:
Nothing you type is sent to a server

Last updated: 2026-10-03

Common use cases

  • Checking a 6-foot doorway against a 183-cm sofa spec before moving day, so the delivery crew does not wedge furniture in the hall.
  • Turning a 5K race entry into miles for a training log kept in imperial units, with the full table confirming each split.
  • Converting fabric cut in yards to meters for a pattern written in metric, while keeping seam allowances exact.
  • Sizing a wall shelf in inches from a plan marked in millimeters, then swapping to double-check the reverse figure. Saved plans stay consistent across systems.

Popular size targets

About this tool

Convert between millimetres, centimetres, metres, kilometres, inches, feet, yards and miles. Type once and see every unit update live — useful for DIY, travel, schoolwork and engineering estimates.

How to use it

  1. Enter a value.
  2. Choose the source unit.
  3. Choose the target unit and read the result.
  4. Swap units with one click if needed.

Worked examples

Input: 10 cm

Output: 3.9370079 in

Input: 5 in

Output: 12.7 cm

Input: 1 m

Output: 3.2808399 ft

Practical tips

  • Type 1 first to see the baseline row across all eight units, then enter your real value and scan the table.
  • Use the swap button to reverse direction without retyping the value or reselecting both units. The entered number stays put.
  • A comma works as a decimal mark, so 1,5 converts exactly the same as 1.5 on any keyboard.

Common mistakes

  • Mixing up feet and inches from a tape read — confirm the exact unit label before trusting the result for a cut.
  • Rounding too early for cuts — copy the full shown value first, then round only at the saw.
  • Reading the wrong table row — the highlighted row always matches your chosen target unit. It follows every new entry.

How this compares

This converter runs the factor math in your tab with a live table of every unit, and nothing is transmitted. The tradeoff: there is no saved history or project log, so copy values you need to keep. Defaults open at meters to feet.

Good to know

  • Eight supported units from millimeters to miles — nautical miles and light-years are not included.
  • Display holds up to 8 significant digits, with very large or tiny values shown in exponential form.
  • No saved history exists — results clear on reload or when you leave, so copy figures first. The page holds no account or log of past entries.

Frequently asked questions

How do I convert lengths?

Enter a value, pick the source and target units, and read the result instantly. For example: 1 meter = 3.28084 feet. All math runs locally in your browser.

Is my data uploaded or stored?

No. Unit conversion is pure arithmetic in your browser — nothing is sent, uploaded or stored.

How precise are the results?

Conversions use double-precision factors and display up to 6 significant decimals with trailing zeros stripped, so everyday and technical values both stay accurate.

Can I see all units at once?

Yes. Below the main result a table lists your value in every supported unit, with the target row highlighted. Change either dropdown and the whole table updates. The table covers all eight units from millimeters to miles, so one entry answers every follow-up question.

Relevant guides

Length Converter Online | GARGLOO