Free Mouse Test Online
Click every button — watch it light up.
At a glance
- Input:
- Your mouse — nothing typed or uploaded
- Processing:
- Runs entirely in your browser — mouse events are matched locally and never leave this page.
- Privacy:
- Nothing is stored or sent. Clicks, scrolls and the polling estimate live only in this tab and disappear when you leave the page.
Last updated: 2026-11-14
Common use cases
- A mouse that double-clicks when you single-click — click the left button ten times and see whether it flags bounce.
- A second-hand gaming mouse before buying — all five buttons, the wheel in both directions, and the polling estimate in a minute.
- A scroll wheel that skips — roll it ten notches down and check the step count matches.
- A new 1000 Hz mouse — move it steadily and confirm the estimate reads about 1000 Hz, not 125.
About this tool
A free online mouse test that runs entirely in your browser: click inside the test area and watch each of the five buttons light up — left, right, middle, back and forward — with a click count per button, a bounce flag for switches that fire twice within 50 ms, a scroll-wheel step counter, a double-click check inside the 500 ms window, and a polling-rate estimate from the gaps between mouse-move events. The honest limits are on the page: the polling number is a browser estimate from event timestamps, not a USB report; side buttons only register when the operating system passes them on; and a laptop trackpad sends smooth scroll, not wheel notches. Nothing is stored or sent.
How to use it
- Click inside the test area with each button — left, right, middle, back and forward — and watch the matching pad light up.
- Roll the scroll wheel up and down and watch the step counters climb.
- Click the left button twice, fast, to measure your double-click — the gap and the fastest double-click are shown.
- Move the mouse steadily inside the area for a few seconds to get the polling-rate estimate, then press Copy report for a plain-text summary.
Worked examples
Input: Click each of the five buttons once
Output: Left 1 · Right 1 · Middle 1 · Back 1 · Forward 1
All five pads lit — a full test lights every button your mouse has.
Input: Click the left button twice, 38 ms apart, on a worn switch
Output: Bounce flagged — Left x1
A second press under 50 ms is switch bounce; the fastest deliberate double-click is about 60–80 ms.
Input: Move the mouse steadily for 5 seconds on a 1000 Hz mouse
Output: About 1000 Hz — median gap 1.0 ms
A browser estimate from event timestamps, not a USB report — treat it as approximate.
Practical tips
- Test the side buttons in another app first if they stay dark — the OS may remap them, not the browser.
- Click slowly, one button at a time — a fast flurry can hide which button bounced.
- Move the mouse in long, steady strokes for the polling estimate — short jerks give noisy gaps.
- Roll the wheel one notch at a time and count — a wheel that jumps two steps per notch is wearing out.
Common mistakes
- Reading 125 Hz as a broken mouse — many mice idle at 125 Hz and only report faster while moving; move steadily before judging.
- Testing the wheel on a trackpad — it sends smooth scroll, not notches, so the step count means something different.
- Ignoring one bounce flag — a single flag on an old mouse is normal; panic only when the same button flags on every press.
- Right-clicking outside the test area — the browser menu opens and the click never registers; test inside the area.
How this compares
Dedicated mouse-test sites do the same job in a tab — this one adds the per-button bounce flags, the double-click measurement and a copyable report, with the same local-only promise. The tradeoff: it tests the mouse the browser can see, and says so plainly about the polling estimate and the side buttons it cannot always reach.
Good to know
- The polling rate is a browser estimate from event timestamps, not a USB report — treat it as approximate, not a measurement.
- Side buttons (Back and Forward) only register when the operating system passes them to the browser — some drivers remap or disable them.
- A laptop trackpad sends smooth scroll, not wheel notches — the wheel test needs a mouse with a physical wheel.
- Touchscreens register taps as left clicks only — buttons, scroll and polling rate need a real mouse.
- The middle-click pad tests the wheel click, not the wheel itself — the wheel is tested by scrolling, not by pressing.
- Nothing is stored or sent — counts, flags and the polling estimate disappear when you leave the page, so there is no history to review later.
Frequently asked questions
Is my mouse data recorded or sent anywhere?
No. The test reads mouse events in this tab only — clicks, scrolls and movement are counted locally, nothing is stored, nothing is sent, and everything disappears when you leave the page.
What is switch bounce — and why does my mouse double-click on its own?
One physical press registering twice — a worn switch bouncing. This tester flags a button when it fires twice within 50 ms. The fastest deliberate double-click is about 60–80 ms, so a flag under 50 ms is almost certainly the switch, not you. One flag on an old mouse is common; the same button flagging on every press means the switch is failing.
Why does my mouse show 125 Hz when the box says 1000 Hz?
Two reasons. First, the browser can only estimate the rate from event timestamps, not from USB reports — the number is approximate. Second, some mice drop to a lower rate on wireless, on battery saving, or when idle, and only report at full speed while moving. Move the mouse steadily for a few seconds and read the estimate again.
My side buttons don't light up — is the mouse broken?
Probably not. The browser only sees side buttons (Back and Forward) when the operating system passes them on. Some mice ship with the side buttons remapped or disabled in their driver software, and some office mice have no side buttons at all. Try the buttons in another app first — if they work there, the browser is the limit, not the mouse.
Can I test the scroll wheel on a laptop trackpad?
Partly. A trackpad sends smooth scroll with tiny deltas, not wheel notches, so the step count still climbs but 'notches' do not apply. For a real wheel test — steps up and down, and whether the wheel skips — use a mouse with a physical wheel.
Does it work on a phone or tablet?
Only with a real mouse connected. Taps on a touchscreen register as left clicks, but buttons, scroll and polling rate cannot be tested without a mouse. Plug in a USB or Bluetooth mouse and test in the phone's browser.

