Skip to main content
GARGLOO

FOOD

Baking Soda vs Baking Powder

Baking soda needs an acid to work; baking powder brings its own. Learn how each one lifts a batter, when to use which, and the exact substitution rules.

Last updated: 2026-11-15 · 8 min read

The short answer

Baking soda and baking powder look almost identical — two white powders in similar boxes — but they are not the same ingredient, and they are not interchangeable spoon for spoon. Baking soda is a single compound, sodium bicarbonate, a base that can only do its job when the recipe gives it something acidic to react with. Baking powder is a complete leavening system in one can: baking soda already mixed with a dry acid and a little starch to keep it dry.

That one difference explains almost everything else. If a recipe contains an acidic ingredient, it usually calls for baking soda. If it does not, it usually calls for baking powder. And if a recipe calls for both, there is a reason for that too: the acid in the batter is real but not enough to do all the leavening on its own.

Getting them mixed up is one of the most common baking mistakes, and the results are easy to recognise: a cake that never rises, a metallic or soapy taste, or cookies that spread into flat discs. Once you know what each powder does, the choice becomes simple.

What baking soda actually does

Baking soda is sodium bicarbonate, a base with a pH of about 8. On its own, stirred into a plain batter, it does very little. But the moment it meets an acid — buttermilk, yogurt, sour cream, lemon juice, vinegar, honey, molasses, brown sugar, or natural (non-Dutched) cocoa — it reacts and releases carbon dioxide gas. Those tiny gas bubbles are what lift a batter, making it rise and giving it an open, tender crumb.

The reaction starts as soon as the soda gets wet and meets the acid, so a batter leavened with baking soda should go into the oven without a long wait. If it sits, the gas escapes and the rise is lost. The amount matters too: too little soda and the batter barely rises; too much and the leftover soda that never finds an acid stays behind, leaving a bitter, soapy or metallic taste and a yellowish tint.

Baking soda does more than lift. Because it is a base, it neutralises some of the acid in a batter, which softens sharp flavours. It also encourages browning and spread, which is why cookies made with baking soda tend to be crisp at the edges, golden, and chewy in the middle rather than pale and puffy.

What baking powder actually does

Baking powder is baking soda with the acid already built in — usually cream of tartar, a powdered form of tartaric acid — plus a little cornstarch to absorb moisture and keep the two from reacting in the can. Because it carries its own acid, it needs nothing from the recipe: just moisture and heat.

Most baking powder sold today is double-acting, which means it reacts twice. The first reaction happens when the powder gets wet in the batter. The second happens in the heat of the oven. That double lift is forgiving: a batter made with baking powder can wait a little while before baking without losing all of its rise, which is one reason pancake and cake batters usually rely on it.

Baking powder is also the weaker of the two. Roughly speaking, baking soda is about three times as strong as baking powder, which is why recipes call for larger amounts of powder — a teaspoon or two, where a quarter or half a teaspoon of soda would do the same lifting work. The trade-off is flavour: because the acid and base in baking powder neutralise each other, it leaves almost no aftertaste behind.

When to use which one

The recipe itself tells you which one it needs. If the batter contains a clear acid — buttermilk, yogurt, sour cream, lemon juice, vinegar, or natural cocoa — baking soda is the natural choice, because the acid is already there waiting to be used. If the batter has no acid at all — milk, eggs, sugar and flour, as in a classic pancake batter — baking powder is the right call, because it brings its own.

Some recipes call for both, and that is not a mistake. It usually means the batter has some acid, but not enough to react with all the soda the recipe needs for a full rise. In that case the baking powder does most of the leavening while the baking soda neutralises the acid, softens its sharpness and adds a little extra lift and browning.

One thing never works: swapping them one for one. Because baking soda is about three times stronger than baking powder, a straight swap either under-leavens the batter or floods it with unreacted soda. If you must substitute, use the rules in the next section — and accept that the result may taste slightly different from the original.

The substitution rules

To replace baking powder with baking soda, use one quarter teaspoon of baking soda plus half a teaspoon of cream of tartar for every one teaspoon of baking powder the recipe calls for. The cream of tartar supplies the acid the soda needs, since the recipe itself has none. So 2 teaspoons of baking powder become half a teaspoon of baking soda plus 1 teaspoon of cream of tartar. Bake the batter right away, because this homemade mix reacts immediately and fades fast.

To replace baking soda with baking powder, use three teaspoons (one tablespoon) of baking powder for every one teaspoon of baking soda. The result may taste slightly bitter or metallic, because baking powder contains more soda than the recipe needs, and the texture may be a little less tender. This direction is the safer of the two — too much powder is more forgiving than too much soda — but it is still a compromise, not an equal swap.

There is one substitution that never works: replacing baking powder with baking soda and no acid at all. Without an acid to react with, the soda just sits in the batter, and you get a flat bake with a soapy taste. If you have no cream of tartar, a teaspoon of lemon juice or white vinegar per half teaspoon of soda can supply the acid in a pinch, but use it only in batters where a little extra liquid and tang will not hurt.

Three real recipes that show the difference

The difference is easiest to see in real dishes. Our classic banana bread uses 1 teaspoon of baking soda. The batter is full of ripe bananas, which are mildly acidic, and that acid is exactly what the soda needs — the soda reacts with it, lifts the loaf, and neutralises the sharpness at the same time. Baking powder would work, but it would miss the browning and tender crumb the soda gives this loaf.

Our chocolate chip cookies also use 1 teaspoon of baking soda. Here the acid comes mainly from the brown sugar, which contains molasses, and the soda does double duty: it lifts the dough a little, and it encourages the cookies to spread, brown and turn chewy at the edges. Cookies made with baking powder instead come out paler, puffier and more cake-like — pleasant, but not the classic cookie texture.

Our classic pancakes, by contrast, use 2 teaspoons of baking powder and no soda at all. The batter is milk, eggs, flour and sugar — nothing acidic — so soda would have nothing to react with. The double-acting powder lifts the batter when it is mixed and again when it hits the hot pan, which is what makes the pancakes tall and fluffy, and the batter can rest for ten minutes while the pan heats without losing its rise.

Frequently asked questions

Can I use baking powder instead of baking soda?

Yes, but use three times as much: 3 teaspoons (1 tablespoon) of baking powder for every 1 teaspoon of baking soda. The result may taste slightly bitter and the texture may be a little less tender, because baking powder is weaker and contains extra soda the recipe does not need.

Can I use baking soda instead of baking powder?

Only if you add an acid. Use 1/4 teaspoon of baking soda plus 1/2 teaspoon of cream of tartar for every 1 teaspoon of baking powder. Without the acid, the soda has nothing to react with, and your bake will stay flat and taste soapy.

Why does my cake taste metallic or soapy?

That is almost always too much baking soda, or soda that never found an acid to react with. Unreacted sodium bicarbonate leaves a bitter, soapy, metallic taste. Measure leaveners carefully with measuring spoons, never a table spoon, and do not add extra soda hoping for more rise.

How do I know if my baking powder is still good?

Spoon half a teaspoon into a small cup of hot water. Fresh baking powder fizzes vigorously right away. If it barely bubbles, it has lost its strength and should be replaced. Both powders weaken over time once opened, so keep them sealed, dry, and away from heat.

Does it matter if my cocoa is natural or Dutch-processed?

Yes. Natural cocoa is acidic and can activate baking soda; Dutch-processed cocoa has been treated with an alkali to neutralise its acid, so it cannot. A recipe written for natural cocoa and soda will not rise properly if you swap in Dutch-processed cocoa without adjusting the leavener.

Sources

Baking Soda vs Baking Powder | GARGLOO