Skip to main content
GARGLOO

Work Hours Calculator — Time Card, Overtime & Pay

Your week, clocked in and added up.

Runs on your device

At a glance

Input:
Numbers you enter
Processing:
Runs locally in your browser
Privacy:
Nothing you type is sent to a server

Last updated: 2026-11-10

Common use cases

  • Adding up a week of clock-in and clock-out times, with breaks deducted, to see total, regular, and overtime hours.
  • Checking a pay stub: 45.5 h at $20/h with 1.5× overtime should be $965.00 — regular $800.00 plus overtime $165.00.
  • Seeing a whole month grouped into real workweeks, so a 45 h week next to a 35 h week still shows its 5 h of overtime.
  • Working out what an overnight shift pays when it ends after midnight.

About this tool

A time card does one job: turn start and end times into hours, then into pay. Enter each day's start, end, and break — tick “Ends after midnight” for overnight shifts — and this calculator shows your total hours, your regular hours, and your overtime hours over 40 in the week, plus regular pay, overtime pay, and total pay at your hourly rate and overtime multiplier. Overtime is per workweek, not per month: a 45 h week next to a 35 h week is 5 h of overtime, not 0 h from pooling 80 h. The US rule is 1.5× over 40 hours a week (FLSA); other jurisdictions differ. Check against your pay stub, not payroll advice — overtime rules vary by country, state, and employer. Everything runs locally in your browser — no signup, no upload.

How to use it

  1. Enter each day's start and end time and break in minutes — 09:00 to 18:00 with a 60-minute break is 8 h.
  2. Leave a day blank for a day off, and tick “Ends after midnight” for a shift that runs past midnight.
  3. Enter your hourly rate and overtime multiplier — 1.5× is the US default; 2× is common for Sundays and holidays in some contracts.
  4. Read your total, regular, and overtime hours and your pay breakdown — or switch to the month view to see days grouped into real workweeks.

Worked examples

Input: Mon–Thu 09:00–18:00, Fri 09:00–19:00, Sat 09:00–14:00, breaks 60/60/30 min · $20/h, 1.5×

Output: 45.5 h total · 40 regular · 5.5 overtime · $965.00 total pay

Overtime is the 5.5 h over 40 in this one week — regular pay $800.00, overtime pay $165.00.

Input: Same 45.5 h week · $20/h, 2× overtime

Output: Overtime pay $220.00 · total pay $1,020.00

The multiplier is editable — 2× is common for Sundays and holidays in some contracts; check your pay stub, not this page.

Input: November 2026 · week of Nov 2: 9 h each weekday (45 h) · week of Nov 9: 7 h each weekday (35 h)

Output: 80 h total · 5 h overtime (week of Nov 2) · 0 h (week of Nov 9)

A monthly total would pool 80 h and show no overtime — overtime is per workweek, so the 5 h from the 45 h week still count.

Practical tips

  • Enter the break you actually took — an unpaid hour a day is 5 h a week, and it comes straight off the total.
  • Check the overtime line before the total: the 5.5 h over 40 is where a wrong pay stub usually hides.
  • Use the month view to spot a heavy week — one 45 h week still earns overtime even next to a light one.
  • Re-run it after a roster change — an extra Saturday shift moves both the hours and the pay.

Common mistakes

  • Pooling the month — 80 h across two weeks is not 0 h of overtime when one week was 45 h.
  • Forgetting the break — 09:00 to 18:00 without a break is 9 h, not 8 h.
  • Treating 1.5× as universal — it is the US FLSA default; your country, state, or contract may say otherwise.
  • Reading decimal hours as hours and minutes — 8.5 h is 8 hours 30 minutes, not 8 hours 50 minutes.

How this compares

Most hours calculators add up a list of numbers and call it a week — no clock-in times, no breaks, no overtime split, and a monthly total that pools everything and hides overtime. This calculator is a real time card: start and end per day, breaks deducted, overnight shifts handled, overtime split at 40 h per workweek with an editable multiplier, and a month view that groups days into real Monday-start workweeks so overtime is counted per week, never pooled. The tradeoff: it is a record of the times you enter — it cannot check them against your employer's system.

Good to know

  • A record of the times you enter — it cannot check them against your employer's system.
  • Overtime is per workweek (Monday–Sunday) at the threshold and multiplier you set — it is not payroll advice.
  • The US 1.5× over 40 hours is the FLSA default; overtime rules vary by country, state, and employer.
  • A week split across two months counts only the days inside each month in the month view — overtime is still per week, never pooled.
  • The currency picker only changes the display symbol; the math is the same in any currency.

Frequently asked questions

How is overtime calculated?

Per workweek: the hours over 40 in a single Monday–Sunday week are overtime, paid at your overtime multiplier — 1.5× by default, the US FLSA rate. A 45.5 h week is 40 regular hours plus 5.5 overtime hours: at $20/h that is $800.00 regular pay plus $165.00 overtime pay, $965.00 in total.

Why is overtime per week, not per month?

Because that is how the rule works — and pooling hides it. A 45 h week next to a 35 h week is 80 h in a month, and a monthly total would show no overtime at all. Counted per workweek, the 45 h week still has 5 h of overtime. This calculator groups the month into real Monday-start workweeks and sums each week's overtime separately.

What if my shift ends after midnight?

Tick “Ends after midnight” on that day and the shift runs into the next day — 22:00 to 06:00 with a 30-minute break is 7.5 h. Without the tick, an end time earlier than the start time is refused with a named error instead of silently computing a negative shift.

Can I change the overtime rate?

Yes — the multiplier is editable. The same 45.5 h week at $20/h pays $165.00 of overtime at 1.5× and $220.00 at 2×, for totals of $965.00 and $1,020.00. 2× is common for Sundays and holidays in some contracts; check your pay stub, not this page, for the rate that applies to you.

Is my data uploaded?

No. The calculation runs entirely in your browser — your hours and pay rate never leave this tab, and nothing is stored.

All calculators
Work Hours Calculator — Time Card, Overtime & Pay | GARGLOO