Skip to main content
GARGLOO

Steak Grill Time Calculator – Pull Temp & Rest

How long per side, when to pull it, how long to rest it.

Runs on your device

At a glance

Processing:
Runs locally in your browser
Privacy:
Nothing you type is sent to a server

Last updated: 2026-11-15

Common use cases

  • Grilling tonight: a 1-inch ribeye, medium-rare, needs 3–4 min/side — pull at 130°F, rest 5 min.
  • Cooking a thick steak: a 2-inch ribeye, medium-rare, needs 5–6 min/side and a 7-minute rest.
  • Doing flank for tacos: a ¾-inch flank, medium, needs 3–4 min/side — pull at 140°F, rest 5 min.
  • Reverse searing: a 1½-inch ribeye, medium, spends about 38 min in a 250°F oven, then 1–2 min/side searing.

About this tool

Steak timing is the most-searched grill query, and every rival in the field answers only part of it: one has the pull-temperature chart, another the presets, another the reverse-sear steps — none of them puts cut, method, thickness, doneness, pull temperature and rest time in one place. This one does: 6 cuts (ribeye, NY strip, filet mignon, sirloin, flank, skirt) × 4 methods (grill, pan-sear, broil, reverse sear) × thickness × 5 donenesses, in English, French, Spanish and Arabic. The pinned reference point is a 1-inch steak, medium-rare — pull at 130°F, finishes about 135°F after rest, 3–4 min/side, rest 5 min — and the pull-temperature ladder (rare 120, medium-rare 130, medium 140, medium-well 150, well-done 160°F) is the standard chart the field's strongest rival (missvickie) and the brightoolbox chart use. Free, no signup, nothing uploaded.

How to use it

  1. Pick the cut — ribeye, NY strip, filet mignon, sirloin, flank or skirt. Flank and skirt are thin cuts, so they stop at 1 inch.
  2. Pick the thickness in inches (centimetres shown too) and the method — grill, pan-sear, broil or reverse sear.
  3. Pick the doneness — rare, medium-rare, medium, medium-well or well-done. The tool shows the pull temperature and the finish temperature after rest.
  4. Read the minutes per side, pull the steak at the pull temperature, and rest it for the minutes shown — then verify doneness with a meat thermometer, not the clock.

Worked examples

Input: Ribeye, grill, 1 inch, medium-rare

Output: 3–4 min/side, pull at 130°F (54°C), finishes about 135°F (57°C), rest 5 min

The pinned reference point: 1-inch steak, medium-rare — pull 130°F, 3–4 min/side, rest 5 min.

Input: Ribeye, grill, 2 inches, medium-rare

Output: 5–6 min/side, pull at 130°F (54°C), finishes about 135°F (57°C), rest 7 min

About 1 extra min/side per extra ½ inch: 3.5 min/side at 1 inch + 2 min for the extra inch = 5.5, shown as 5–6.

Input: Flank, grill, ¾ inch, medium

Output: 3–4 min/side, pull at 140°F (60°C), finishes about 145°F (63°C), rest 5 min

Flank cooks a little faster (factor 0.85) and finishes exactly at the USDA safe minimum of 145°F.

Practical tips

  • Start checking the temperature a minute before the low end of the range — grills lie, and the thermometer is the final word.
  • Rest the steak loosely tented with foil, not wrapped tight — wrapping steams the crust you just built.
  • For reverse sear, pull the steak out of the oven 10°F below its pull temperature — the sear adds the last degrees.
  • Slice flank and skirt thinly across the grain: the cut matters as much as the cook for tenderness.

Common mistakes

  • Pulling at the finish temperature instead of the pull temperature — carryover cooking adds about 5°F during the rest, so a steak pulled at 135°F finishes at 140°F.
  • Cutting into the steak straight off the grill — the juices run out onto the board instead of staying in the meat; rest it 5 minutes first.
  • Trusting time alone — times are estimates, and only a thermometer in the thickest part proves 130°F for medium-rare or 145°F for medium.
  • Grilling a thick steak the same way as a thin one — a 2-inch steak needs the extra minutes per side, and past medium it benefits from moving to indirect heat or a reverse sear.

How this compares

The strongest rival, missvickie, ships presets with pull temperatures, rest times and a reverse-sear mode in English only; brightoolbox has the pull-temperature chart, and solvetutor discloses its linear model. This tool puts cut, method, thickness, doneness, pull temperature and rest in one answer, in English, French, Spanish and Arabic — free, no signup, nothing uploaded. The honest tradeoff is the model itself: the per-side time is a straight line in thickness, disclosed as a simplification, not a measured law — a thick steak cooked by the line will run hotter on the outside than the model implies, which is why the tool keeps telling you to check with a thermometer.

Good to know

  • The thickness scaling is linear by design — a disclosed simplification, not a measured law. Real heat transfer is not linear, and the times are a starting point, not a guarantee.
  • Times assume a steak starting at refrigerator temperature on a preheated grill or in a ripping-hot pan — a room-temperature steak or a cold grill changes the result.
  • Reverse-sear oven minutes (about 20 min per inch at medium-rare) are an estimate — oven thermostats vary, so pull by temperature, not by the clock.
  • Rare and medium-rare finish below the USDA safe minimum of 145°F + 3 min rest. The tool flags that instead of hiding it, but the choice — and the risk — is yours.

Frequently asked questions

How long do you grill a 1-inch steak for medium-rare?

3–4 minutes per side on a hot grill. Pull it at 130°F (54°C) — it finishes at about 135°F (57°C) after resting 5 minutes. That is the pinned reference point this tool is built on: 1-inch steak, medium-rare, pull 130°F, 3–4 min/side, rest 5 min.

How much longer does a thicker steak take?

About 1 extra minute per side for every extra ½ inch — a 1½-inch medium-rare steak takes 4–5 min/side and a 2-inch one takes 5–6 min/side, both pulled at 130°F. That linear rule is a disclosed simplification in this tool, not a measured law: real heat transfer is not linear, so use the range as a starting point and the thermometer as the answer.

What temperature do you pull a steak at for each doneness?

Rare 120°F, medium-rare 130°F, medium 140°F, medium-well 150°F, well-done 160°F — each finishes about 5°F higher during the rest (125, 135, 145, 155 and 165°F). Pull the steak off the heat at the pull temperature, not the finish temperature: carryover cooking does the last 5°F while it rests.

How long should a steak rest?

5 minutes for a 1-inch steak, longer for thicker ones — 6 minutes at 1½ inches, 7 at 2 inches, up to 10 minutes at 2½ inches. Rest it loosely tented with foil: the juices redistribute instead of running out onto the board when you cut it.

Is medium-rare steak safe to eat?

Medium-rare finishes at about 135°F, below the USDA safe minimum of 145°F plus 3 minutes of rest for whole cuts of beef — and rare finishes lower still, at about 125°F. That is the whole point of rare and medium-rare, and also a real food-safety tradeoff. The USDA's rule is to verify with a thermometer, not the clock, and this tool flags any doneness that finishes below 145°F instead of hiding it.

How does reverse sear work?

Cook the steak low and slow first — about 20 minutes per inch in a 250°F oven at medium-rare — until it is 10°F below its pull temperature, then sear it 1–2 minutes per side in a ripping-hot pan or on the grill. For a 1½-inch ribeye at medium, that is about 38 minutes in the oven, then the sear, then a 6-minute rest. The oven minutes are an estimate, labelled as one in the tool.

Is my data sent anywhere?

No. The calculation runs entirely in your browser — your cut, method, thickness and doneness never leave your device. No signup, no upload.

All recipes
Steak Grill Time Calculator – Pull Temp & Rest | GARGLOO