Skip to main content
GARGLOO

One Rep Max Calculator — Epley, Brzycki & Lander

How much could you lift for one rep — without testing it?

Runs on your device

At a glance

Input:
Numbers you enter
Processing:
Runs locally in your browser
Privacy:
Nothing you type is sent to a server

Last updated: 2026-11-13

Common use cases

  • Finding your max — 100 kg × 5 reps gives an estimated 1RM of 114.3 kg (Epley 116.7, Brzycki 112.5, Lander 113.7).
  • Setting training loads — at a 114.3 kg max, 90% is 102.9 kg for strength work and 70% is 80.0 kg for hypertrophy.
  • Working in pounds — 225 lb × 5 reps estimates a 257.2 lb max, with the unit toggle converting everything.
  • Checking a light set — 60 kg × 1 rep gives 62.0 (Epley), 60.0 (Brzycki) and 60.8 (Lander): the formulas disagree least at 1 rep.

About this tool

Enter the weight you lifted and the reps you did, and see your estimated one-rep max — the heaviest weight you could lift once — without ever testing it. Three classic formulas run side by side: Epley w × (1 + reps ÷ 30), Brzycki w × 36 ÷ (37 − reps), and Lander 100 × w ÷ (101.3 − 2.67123 × reps). The worked example is 100 kg × 5 reps: Epley 116.7 kg, Brzycki 112.5 kg, Lander 113.7 kg, an average of 114.3 kg. The average is the best single estimate, and the spread between the formulas is the honest size of the uncertainty. Below it, the training-load table turns the max into working weights: 90% is 102.9 kg, 70% is 80.0 kg, 60% is 68.6 kg. A kg/lb toggle converts the weight and every result (100 kg is 220.5 lb; 225 lb × 5 reps estimates 257.2 lb). Most accurate at 2–10 reps — past 10 the estimates drift, so the tool caps reps at 10. Estimates only, not medical advice; never test a true 1RM without spotters and proper form. Nothing is fetched or uploaded: everything runs locally in your browser.

How to use it

  1. Pick your unit — kilograms or pounds.
  2. Enter the weight you lifted and how many reps you did (1–10).
  3. Read the three formula estimates and their average — that is your estimated 1RM.
  4. Use the percentage table for your training loads: 85–100% for strength, 70–85% for muscle, 60–70% for endurance.
  5. Re-test when you get stronger — a new 5-rep weight gives a new max.

Worked examples

Input: 100 kg × 5 reps

Output: 1RM 114.3 kg · Epley 116.7 · Brzycki 112.5 · Lander 113.7

Epley 100 × (1 + 5 ÷ 30) = 116.7. Brzycki 100 × 36 ÷ 32 = 112.5. Lander 10,000 ÷ (101.3 − 13.35615) = 113.7. Average (116.7 + 112.5 + 113.7) ÷ 3 = 114.3.

Input: 80 kg × 10 reps

Output: 1RM 106.9 kg · Epley 106.7 · Brzycki 106.7 · Lander 107.3

Epley 80 × (1 + 10 ÷ 30) = 106.7. Brzycki 80 × 36 ÷ 27 = 106.7. Lander 8,000 ÷ (101.3 − 26.7123) = 107.3. The three formulas agree closely at 10 reps.

Input: 225 lb × 5 reps

Output: 1RM 257.2 lb · Epley 262.5 · Brzycki 253.1 · Lander 255.8

Epley 225 × (1 + 5 ÷ 30) = 262.5. Brzycki 225 × 36 ÷ 32 = 253.1. Lander 22,500 ÷ 87.94385 = 255.8. Average 257.2 lb. 100 kg = 220.5 lb.

Practical tips

  • Use the average, not one formula — it cancels out part of each formula's bias.
  • Test at 5 reps: heavy enough to be accurate, light enough to be safe without a true max attempt.
  • Work off a training max — 90% of your 1RM — so the weights stay liftable on a bad day: 90% of 114.3 kg is 102.9 kg.
  • Re-test every 4–6 weeks: a new 5-rep weight gives a new max, and the table updates with it.

Common mistakes

  • Trusting one formula as the truth — the three disagree by a few kilos on the same set; the spread is the uncertainty.
  • Estimating from 15+ reps — past 10 reps the formulas drift and usually run high; use a heavier weight instead.
  • Testing a true 1RM alone — a failed max without spotters is how lifters get hurt; estimate it instead.
  • Forgetting the unit — 100 kg is 220.5 lb, not 100 lb; check the toggle before typing the weight.

How this compares

Most 1RM calculators on the web run one formula — usually Epley — and show a single number, hiding the uncertainty. This one shows all three classic formulas (Epley, Brzycki, Lander) side by side with their average, so the disagreement is visible, and adds the 60–100% training-load table the field's polished tools offer, plus a kg/lb toggle that converts the weight and every result. The formulas and the worked numbers are on the page, and the reps cap at 10 because that is where the formulas stay accurate. The tradeoff is that it is an estimator, not a measurement: a real maximum is lifted, with spotters, not calculated — and it never claims otherwise.

Good to know

  • Estimates only — not medical advice, and not a measured maximum.
  • Most accurate at 2–10 reps; accuracy drifts past 10, so reps are capped at 10.
  • The three formulas disagree by a few kilos on the same set — the spread is the uncertainty.
  • Never test a true 1RM without spotters and proper form.
  • Assumes a standard barbell lift; machine and bodyweight exercises follow different curves.

Frequently asked questions

What is my one rep max if I lift 100 kg for 5 reps?

About 114.3 kg — the average of three formulas: Epley 100 × (1 + 5 ÷ 30) = 116.7 kg, Brzycki 100 × 36 ÷ (37 − 5) = 112.5 kg, and Lander 100 × 100 ÷ (101.3 − 2.67123 × 5) = 113.7 kg. The average is the best single estimate; the 4.2 kg spread between the formulas is the honest size of the uncertainty.

Which 1RM formula is the most accurate?

None of them is the truth for you personally — each was fitted to a different group of lifters, so they disagree by a few kilos on the same set. Epley tends to run high at higher reps, Brzycki runs a little low, and Lander sits between them. That is why this tool shows all three and averages them: the average cancels out part of each formula's bias. A real maximum is measured on the platform with spotters, never calculated.

Why do the three formulas disagree?

Because they come from different data. Epley (1985) is the simplest — add 1/30th per rep. Brzycki (1993) curves down as reps rise, so it gives lower numbers at 8–10 reps. Lander fits a different curve again. At 100 kg × 5 they give 116.7, 112.5 and 113.7 kg; at 80 kg × 10 they give 106.7, 106.7 and 107.3 kg — close, but never identical. The disagreement is information, not an error.

How do I use the percentage table?

It is your training loads: 85–100% of your 1RM builds maximal strength (1–5 reps), 70–85% builds muscle (6–12 reps), and 60–70% builds endurance (12+ reps). At a 114.3 kg max, 90% is 102.9 kg and 70% is 80.0 kg. Many programs work off a training max — 90% of your 1RM — so the weights stay liftable on a bad day: 90% of 114.3 kg is 102.9 kg.

How accurate is it past 10 reps?

It drifts. The formulas were fitted on sets of 10 reps or fewer, and past 10 the estimates spread out and usually run high — a 20-rep set can overestimate your max by 10 kg or more. If you can do more than 10 reps, use a heavier weight and retest at 5 reps instead. That is why this tool caps reps at 10.

What is 225 lb × 5 reps as a one rep max?

About 257.2 lb on average: Epley 225 × (1 + 5 ÷ 30) = 262.5 lb, Brzycki 225 × 36 ÷ 32 = 253.1 lb, and Lander 255.8 lb. Switch the unit toggle to pounds and the tool converts the weight and all three results for you — 100 kg is 220.5 lb.

Is my data uploaded?

No. Everything runs locally in your browser — nothing is fetched, sent or stored. Your lifts never leave the device.

All calculators
One Rep Max Calculator — Epley, Brzycki & Lander | GARGLOO