Skip to main content
GARGLOO

Square Meters to Square Feet Converter Online

Square metres to square feet, converted exactly.

Runs on your device

At a glance

Processing:
Runs locally in your browser
Privacy:
Nothing you type is sent to a server

Last updated: 2026-10-25

Common use cases

  • Converting apartment and house sizes for international listings
  • Reading floor plans dimensioned in square metres as square feet
  • Comparing property sizes across metric and US listings
  • Converting land and garden areas from m² to ft²

Popular size targets

About this tool

Square metres rule property listings almost everywhere; square feet rule US real estate. This page opens the Area Converter preset to m² → ft² — type a value and get the exact conversion, plus the table below for the numbers people look up most. Common conversions: 1 m² = 10.7639 ft², 10 m² = 107.6391 ft², 50 m² = 538.1955 ft², 100 m² = 1076.3910 ft².

How to use it

  1. Type your square-metre value — the converter already shows m² → ft².
  2. Read the result instantly; the full equivalents table updates with it.
  3. Swap the units to convert square feet back to square metres.
  4. Copy the result into your listing, plan or comparison.

Practical tips

  • For apartments, convert the whole figure (120 m² = 1291.67 ft²) — US listings usually round to whole square feet.
  • Land buyers: 1 hectare = 10,000 m² = 107,639 ft², so convert hectares to m² first if your deed reads in hectares.
  • When comparing listings, convert both to the same unit before judging size — mixed units hide real differences.
  • Room check: a 20 m² bedroom is 215.28 ft², and a 100 m² apartment is 1,076.39 ft² — multiply square metres by 10.7639 and round to whole square feet for listings.

Common mistakes

  • Dividing by 10.7639 instead of multiplying — that converts ft² to m², not m² to ft².
  • Using 10.76 as a shortcut for large areas — fine for a room, but off by about 4 ft² at 1000 m².
  • Confusing m² with linear metres — a 10 m wall is not 10 m² of floor.

How this compares

This preset is the Area Converter with m² → ft² already selected, plus the table and formula on this page. The tradeoff versus the main converter: one pair, zero setup — for anything else, the main tool covers ten area units including acres and hectares.

Good to know

  • Results display up to 8 significant digits; the underlying factor is exact.
  • The converter handles one value at a time — batch lists belong in a spreadsheet.
  • Area only: for length, volume or speed, use the matching converter.

Frequently asked questions

How many square feet is 1 square metre?

1 m² = 10.7639 ft². The square foot is defined as exactly 0.09290304 m², so 1 ÷ 0.09290304 = 10.7639 ft².

What is the formula for m² to ft²?

Multiply square metres by 10.7639. Example: 100 m² × 10.7639 = 1076.39 ft².

Is the result exact?

The factor 0.09290304 is exact by definition; the display shows up to 8 significant digits, which is finer than any floor plan.

Are my numbers uploaded?

No. Conversion runs entirely in your browser tab — values never leave your device.

Can I convert square feet back to square metres?

Yes — swap the units in the converter, or use the main Area Converter with square feet → square metres.

Square Meters to Square Feet Converter Online | GARGLOO