Skip to main content
GARGLOO

Flooring Calculator

Boxes, planks and cost for laminate, vinyl, hardwood and tile.

Runs on your device

At a glance

Input:
Numbers you enter
Processing:
Runs locally in your browser
Privacy:
Nothing you type is sent to a server

Last updated: 2026-11-09

Common use cases

  • Working out how many boxes of laminate to buy before redoing a bedroom floor
  • Budgeting a vinyl plank kitchen, from boxes to underlayment
  • Checking whether a herringbone layout is worth its extra 20% waste
  • Estimating hardwood for a living room plus a closet before ordering

About this tool

Redoing a floor? Work out the flooring before you buy it. Enter the room size, the flooring type, the layout and the box coverage and this calculator gives you the room area, the area to buy with waste, the planks or boards needed, the boxes to buy, the underlayment rolls and the cost if you enter a price per square foot. It runs entirely in your browser — no signup, no upload.

How to use it

  1. Choose metric or imperial units — the fields switch between metres/centimetres and feet/inches.
  2. Enter the room length and width, and add any extra rectangles for closets or alcoves.
  3. Pick the flooring type — laminate, vinyl plank, hardwood or tile — and check the piece size and box coverage against your box.
  4. Pick the layout: straight (10% waste), diagonal (15%) or herringbone (20%).
  5. Read the result: room area, area to buy, planks, boxes to buy, underlayment rolls and the estimated cost if you entered a price.

Worked examples

Input: 12 ft × 14 ft room (168 ft²) · laminate · straight · 20 ft²/box · $2.50/ft²

Output: 168 ft² · 184.8 ft² to buy · 74 planks · 10 boxes · 2 underlayment rolls · about $462.00

The mandatory check: 168 ft² plus 10% waste is 184.8 ft² — 9.24 boxes, so 10 boxes at 20 ft² per box.

Input: 5 m × 4 m room (20 m²) · vinyl plank · diagonal · 2.14 m²/box · $10/m²

Output: 20 m² · 23 m² to buy · 105 planks · 11 boxes · 3 underlayment rolls · about $230.00

Diagonal costs 15% waste instead of 10% — 23 m² to buy instead of 22, and 11 boxes instead of 10.

Input: 15 ft × 12 ft room + 4 ft × 3 ft closet (192 ft²) · hardwood · herringbone · 20 ft²/box · $6/ft²

Output: 192 ft² · 230.4 ft² to buy · 139 boards · 12 boxes · 3 underlayment rolls · about $1382.40

The closet adds 12 ft² before waste — herringbone at 20% takes 192 ft² to 230.4 ft² and 12 boxes.

Practical tips

  • Buy all flooring from one batch — the shade and grain vary between batches, and a second batch can look different on the floor.
  • Round up, never down — a short box costs more in delay than an extra box costs in money.
  • Keep a spare box after the job — matching a batch later is often impossible.

Common mistakes

  • Forgetting waste — a room measured exactly is a room that runs short before the last row.
  • Forgetting the closets and alcoves — measure every rectangle the floor covers, not just the main room.
  • Counting boxes from the exact area instead of the area with waste.

How this compares

Flooring shops sell by the box and quote by the square foot, but neither tells you how many boxes the room actually needs once waste, cuts and extra areas are counted. This calculator starts from the room and any extra rectangles, applies the waste for the layout you picked, and rounds up to whole boxes — then adds the planks, the underlayment rolls and the cost so the shopping list is complete in one place. The tradeoff: box coverage varies by manufacturer, so the figure on your box governs — and prices are planning figures, not quotes.

Good to know

  • Box coverage varies by manufacturer — use the coverage printed on your box; the calculator's defaults are typical figures, not a promise.
  • Underlayment assumes 100 ft² (9.29 m²) per roll — check your roll's own coverage.
  • Flooring is sold by the box: the calculator rounds up to whole boxes, so you may have spare planks left over.
  • The cost is only an estimate from the price per square foot you enter — the calculator never assumes a price, and prices are planning figures, not quotes.

Frequently asked questions

How many boxes of flooring do I need for a 12 × 14 ft room?

With laminate at 20 ft² per box in a straight layout: the room is 168 ft², plus the usual 10% waste — 184.8 ft² to buy. Divide by the box coverage and round up: 184.8 ÷ 20 = 9.24, so buy 10 boxes.

How much waste should I allow for flooring?

Straight layouts need 10%, diagonal 15%, and herringbone 20%. The calculator applies the waste to the room area first, then rounds up to whole boxes, because flooring is sold by the box.

Why does the box coverage matter more than the plank size?

Boxes are what you buy: the calculator divides the area to buy by the coverage printed on the box and rounds up. Plank size only sets the plank count. Coverage varies by manufacturer, so use the figure on your box — the calculator lets you edit it.

Do I need underlayment?

Laminate and vinyl plank usually need underlayment; hardwood often does not, and tile never does — thinset goes under tile instead. The calculator counts rolls at 100 ft² per roll when the toggle is on; turn it off for tile or glue-down floors.

Is my data uploaded?

No. The calculation runs entirely in your browser — your measurements never leave this tab, and nothing is stored.

All calculators
Flooring Calculator | GARGLOO