Brine Calculator – Wet, Dry Brine & Ferment Salt
How much salt for a brine, a dry brine or a ferment — by weight.
At a glance
- Processing:
- Runs locally in your browser
- Privacy:
- Nothing you type is sent to a server
Last updated: 2026-11-15
Common use cases
- Brining a whole chicken: 2 litres of water at 5.5% needs 110 g of salt — about 14 tablespoons of Diamond Crystal kosher, or 6 of table salt.
- Dry-brining a 1.5 kg chicken: 1% of its weight is 15 g of salt, rubbed on and left uncovered in the fridge overnight.
- Making sauerkraut: 1 kg of cabbage at 2.5% needs 25 g of salt — then follow a tested NCHFP recipe for the ferment itself.
- Fermenting pickles: 1 kg of cucumbers at 4% needs 40 g of salt, and the cucumbers must stay under the brine the whole time.
About this tool
Brining and fermenting are one calculation — salt as a percentage by weight — split across five rival tools, none of which combines wet brine, dry brine and ferment with every salt type. This one does all three in one place, in four languages. A standard meat brine is 5–6% salt by weight of water (50–60 g per litre); a dry brine is 0.85–1.5% of the meat's weight; sauerkraut and kimchi ferment at 2–3% by vegetable weight and fermented pickles at 3.5–5%. You pick the form, the salt type — table, Morton kosher, Diamond Crystal kosher, fine or coarse sea, pickling or Himalayan pink — and the weight, and the tool gives the salt in grams, with the spoon equivalent only as an approximation. Because a cup of Diamond Crystal kosher is not a cup of table salt, this tool works by weight and says so.
How to use it
- Pick the form: wet brine (salt dissolved in water), dry brine (salt rubbed onto the meat) or ferment (salt on vegetables).
- Enter the weight — litres of water, kilos of meat or kilos of vegetables — and pick your salt type from the seven listed.
- Set the salt strength with the slider. The standard ranges are marked: 5–6% wet, 0.85–1.5% dry, 2–3% for sauerkraut and kimchi, 3.5–5% for fermented pickles.
- Read the salt weight in grams and weigh it — do not scoop it. The spoon equivalent is approximate, and the table below shows how different the spoons are across salt types.
Worked examples
Input: Wet brine, 2 litres of water, 5.5% salt
Output: 110 g of salt — about 14 tbsp of Diamond Crystal kosher, or about 6 tbsp of table salt
5.5% of 2,000 g of water is 110 g; Diamond Crystal is 8 g per tbsp, table salt 18 g.
Input: Dry brine, 1.5 kg chicken, 1% salt
Output: 15 g of salt — about 2 tbsp of Diamond Crystal kosher
1% of 1,500 g is 15 g; dry-brine the chicken 12–24 hours, uncovered, in the fridge.
Input: Ferment, 1 kg cabbage (sauerkraut), 2.5% salt
Output: 25 g of salt
2.5% of 1,000 g is 25 g; then follow a tested NCHFP sauerkraut recipe — the percentage alone does not make it safe.
Practical tips
- Weigh the salt, always — 110 g is about 14 tablespoons of Diamond Crystal kosher but only about 6 of table salt, and the brine would be twice as salty if you swapped them cup for cup.
- Dissolve wet-brine salt fully before the meat goes in, and chill the brine first — warm brine warms the meat into the danger zone.
- Dry-brine uncovered in the fridge: the dry surface is what browns so well in the oven, and the salt needs 12–24 hours to work through a whole bird.
- For ferments, keep every scrap of vegetable under the brine — anything poking out can mould, whatever the salt percentage is.
Common mistakes
- Measuring salt in cups across types — a cup of Diamond Crystal (about 128 g) and a cup of table salt (about 288 g) are not the same brine at all.
- Brining meat on the counter — brining happens in the fridge at 40°F (4°C) or below, for the whole time, or bacteria grow in the brine.
- Reusing a meat brine — it has raw-meat juices in it; throw it out after one use.
- Trusting the salt percentage to make a ferment safe — safety comes from following a tested recipe (NCHFP), not from hitting 2.5% on a calculator.
How this compares
The strongest rival, miniwebtool, covers 7 salt types and 3 directions in English only; moneydeck does wet plus ferment, starlighttools wet plus dry with presets. This tool combines wet, dry and ferment in one place, with all 7 salt types, per-meat timing presets and the volume table that shows why cups are not interchangeable — all in English, French, Spanish and Arabic, free, no signup, nothing uploaded. The honest tradeoff is scope: it calculates the salt, it does not choose a recipe for you — for pickles and sauerkraut, a tested NCHFP recipe is the authority, and this tool links to it instead of pretending otherwise.
Good to know
- Salt densities are published averages (King Arthur Baking: table 18 g, Morton kosher 14 g, Diamond Crystal kosher 8 g per tablespoon) — crystal size varies by brand, so the spoon equivalents are approximate and the gram figure is the authority.
- Brining times are typical guidance ranges, not safety rules — a thin chop brines in an hour and a whole turkey takes a day or two, and the fridge is mandatory throughout.
- Fermentation times and safety depend on the recipe, the temperature and the vegetables — this tool gives the salt weight only; the NCHFP tested recipe governs the rest.
- Sugar is optional in a wet brine and is not part of the salt percentage — the tool shows it separately so it never inflates the salt figure.
Frequently asked questions
How much salt do you need for a wet brine?
A standard meat brine is 5–6% salt by weight of water — 50–60 g of salt per litre of water. For 2 litres of water at 5.5%, that is 110 g of salt. Dissolve the salt fully in the water before the meat goes in, and brine in the fridge, never on the counter.
How much salt for a dry brine?
A dry brine is 0.85–1.5% of the meat's weight — about 1% is the usual target. A 1.5 kg chicken at 1% needs 15 g of salt, rubbed over the skin and left uncovered in the fridge for 12–24 hours. Weigh the salt: 15 g is about 2 tablespoons of Diamond Crystal kosher but under 1 tablespoon of table salt.
How much salt for sauerkraut or fermented pickles?
Sauerkraut and kimchi ferment at 2–3% salt by vegetable weight — 1 kg of cabbage at 2.5% needs 25 g of salt. Fermented pickles need more, 3.5–5%, because cucumbers spoil faster. The percentage alone does not make a ferment safe: use a tested recipe from the National Center for Home Food Preservation (NCHFP) and follow it exactly.
Why does the tool work in grams instead of cups?
Because salt volumes differ by type — a cup of Diamond Crystal kosher weighs about 128 g, a cup of Morton kosher about 224 g and a cup of table salt about 288 g. The same recipe measured in cups gives a brine twice as salty with one salt as with another. Weighing in grams makes the percentage exact whatever salt you use; the tool shows the spoon equivalent only as an approximation.
How long do you brine meat?
Typical ranges: a whole chicken 8–12 hours wet or 12–24 hours dry, a whole turkey 12–24 hours wet or 24–48 hours dry, pork chops 1–2 hours, fish fillets 30–60 minutes and shrimp 15–30 minutes. These are guidance, not safety rules — fish and shrimp go mushy if brined too long, and the meat must stay refrigerated (40°F / 4°C or below) the whole time.
Is my data sent anywhere?
No. The calculation runs entirely in your browser — your meat, water and salt never leave your device. No signup, no upload.

