Blob Shape Generator – Organic CSS & SVG Blobs
Organic blobs for your site — CSS or SVG.
At a glance
- Input:
- CSS · SVG · PNG
- Output:
- CSS border-radius code, SVG blob path or PNG
- Processing:
- Runs locally in your browser
- Privacy:
- Nothing you type is sent to a server
Last updated: 2026-11-15
Common use cases
- Making an organic hero background blob behind a headline
- Building a wavy SVG divider between two page sections
- Rounding a profile photo or card into an amoeba shape with one CSS rule
- Exporting a blob as a PNG for a slide deck or social post
About this tool
Drag eight sliders to shape an organic CSS blob — four horizontal radii, four vertical radii, joined with a slash — or switch to SVG mode and re-roll a randomized smooth blob path, or a wave divider. Pick a preset, choose a fill colour, then copy the CSS, the SVG path, a full SVG or a PNG. Live preview, no upload, no signup.
How to use it
- Stay in CSS mode and drag the eight radius sliders — or pick a preset, or hit Randomize — and watch the blob reshape live.
- Switch to SVG mode for an organic path: set the point count and irregularity, then Re-roll until the outline looks right; or pick the wave divider and tune waves, amplitude and phase.
- Choose a fill colour from the swatches or type your own HEX code.
- Copy the CSS, the SVG path or the full SVG from the export panel — or download the PNG.
Worked examples
Input: Blob preset · default radii
Output: border-radius: 60% 40% 30% 70% / 60% 30% 70% 40%;
Four horizontal radii, a slash, then four vertical — each corner gets its own horizontal and vertical curve.
Input: SVG mode · 8 points · irregularity 40% · Re-roll
Output: M 87.08 50.88 C 87.34 60.89, 82.17 75.04, 76.48 81.29 … Z — a closed smooth path
Every re-roll draws a new closed path of cubic Bézier curves — paste the d into any <path> or copy the full SVG.
Input: Wave mode · 3 waves · amplitude 40 · 1200×400
Output: M 0 200 C 5.56 203.33, 22.22 214.23, 33.33 220 … L 1200 400 L 0 400 Z
A smooth crest closing to the bottom edge — a section divider that pastes between two blocks.
Practical tips
- Start from a preset and nudge one slider at a time — small changes to one corner make the biggest difference to the silhouette.
- Keep opposite corners roughly balanced (top-left with bottom-right) for a shape that reads as one blob, not two lumps.
- The wave divider is 1200×400 — set it to width: 100% in your CSS and it stretches to any section.
- Use the PNG export for slides and social posts, and the SVG for the site itself — the SVG stays sharp at any size.
Common mistakes
- Forgetting the slash — border-radius: 60% 40% 30% 70% with no slash sets all four corners to the same value in both directions; the organic look needs the / and the second set of four.
- Pushing every slider to 100% — the corners meet in the middle and the shape collapses; keep at least one radius per corner under 80%.
- Expecting the CSS blob to clip an image — border-radius shapes the element itself; to clip a photo into a blob, use the SVG path as a clipPath instead.
- Copying the wave path without its closing lines — the L 1200 400 L 0 400 Z tail is what fills the area under the crest; without it you get a line, not a divider.
How this compares
Most blob tools in the field are English-only single-purpose pages — a border-radius slider or a blob path randomizer, rarely both, and almost never a wave divider on the same page. This one ships both modes plus presets, colour swatches and PNG export, in 4 languages from day one. Its edge is breadth, not a new shape — every blob here is the same border-radius and Bézier math the field uses. The tradeoff: no freehand drawing — the outline comes from sliders and the randomizer, not a pen.
Good to know
- CSS mode shapes the element itself — it does not clip a photo into a blob; use the SVG path as a clipPath for that.
- SVG blobs are 5–12 points; very intricate outlines belong in an SVG editor, not a randomizer.
- The wave divider is fixed at 1200×400 — scale it with CSS width, it stays sharp because it is a vector path.
- PNG export is a single raster image at 800×800 (blob) or 1200×400 (wave) — for larger sizes, use the SVG.
Frequently asked questions
What is a CSS blob?
An organic, blobby shape made with one CSS property: border-radius with 8 values — four horizontal radii, a slash, then four vertical radii. Each corner gets its own horizontal and vertical curve, so a square becomes a pebble, a leaf or an amoeba with a single line of CSS.
How do I use the blob on my site?
In CSS mode, copy the .blob block and paste it into your stylesheet, then put the class on any element. In SVG mode, copy the full SVG and paste it into your HTML, or copy just the path d and drop it into your own <svg>. The PNG download is a ready-made image file.
What is the wave mode for?
Section dividers. The wave variant draws a smooth sine crest across a 1200×400 canvas and closes to the bottom edge — paste the SVG between two page sections for a wavy divider, and tune the wave count, amplitude and phase with the sliders.
Does the SVG blob work in all browsers?
Yes — an SVG <path> with cubic Bézier curves is supported in every modern browser, and the CSS border-radius blob works everywhere too. The exported code has no JavaScript and no dependencies, so it pastes into any site, including plain HTML.
Is my shape uploaded anywhere?
No. The sliders, the randomizer, the re-roll and all three exports run entirely in your browser — nothing you draw or copy leaves this tab. The PNG is drawn from the same path on a canvas in your tab.

